Transparency Separators - Xerox DocuColor 240 Supplementary Manual

DocuColor 240/250

Transparency Separators

When making a set of transparencies you can insert a divider between each
transparency in order to make it easier to manage your presentation slides. This
option is reached from the Output Format tab on the touch screen.
Transparency Separators are not available if the Auto Paper Supply option is
selected.
The Transparency Separators screen is shown below.
When you select the No Separators option, your transparencies will be delivered
to the output destination without a blank sheet of paper separating each
transparency.
When you select the Blank Separators option, your transparencies will be
delivered to the output destination with a blank sheet of paper separating each
transparency.
The Blank Separators and Distribution Sets option will insert a blank sheet of
paper between each printed transparency. In addition, a distribution set of
copies will also be printed on the stock you specify using the Paper Tray
Settings button.
When you select the No Separators and Distribution Sets option, the
transparencies will be produced without separators. However, a distribution set of
copies will be printed on the stock you specify using the Paper Tray Settings
button.
The system selects the highest priority tray for the separator stock. Selecting the
Paper Tray Settings button allows you to change the separator stock selection.
DocuColor 240/250 Training and Information Guide 59