Professional Finisher With Booklet Maker - Xerox DocuColor 240 Supplementary Manual

DocuColor 240/250

Professional Finisher with Booklet Maker

This output device provides a wide range of finishing options.
This output device provides a wide range of finishing options. The Right Top
Tray is used for stacked output, and can receive up to 500 sheets of paper. The
Right Center Tray is used for offset and/or stapled output, and can hold up to
1500 sheets. Both trays can be used for hole punched output (optional). The
Bottom Finisher Tray is used for receiving saddle-stapled booklets.
The machine can finish your copies with one or two staples. Up to 50 sheets of
paper from 8" x 10" to 11" x 17" paper can be stapled in a set although if covers,
inserts or heavier paper is used this number will reduce. The staple cartridge
holds 5,000 staples.
Your machine will be set to either 2 hole/4 hole punch, or 2 hole/3 hole punch.
Each sheet is punched individually so there is no limit to the numbers in the set.
Hole punching can only be selected for 8.5" x 11" long edge feed and 11" x 17"
paper and can be combined with a stapling option.
DocuColor 240/250 Training and Information Guide 95