Xerox DocuMate 250 Hardware Replacement Manual
Xerox DocuMate 250 Hardware Replacement Manual

Xerox DocuMate 250 Hardware Replacement Manual

Replacing toner cartridge
Hide thumbs Also See for DocuMate 250:

Advertisement

Fig. 1
Using both hands gently open the front cover.
Fig. 2
Select the toner cartridge that needs to be replaced.
Fig. 3
Pull the toner cartridge indicated in the message on the display out.
Note: "Y" stands for Yellow, "M" for Magenta, "C" for Cyan, and "K"
for Black.
Fig. 4
Lightly shake the "new" toner cartridge three or four times up and down
and to the left and right.

Replacing Toner Cartridge - 1 of 2

Fig. 5
Insert the toner cartridge as far as possible.
Fig. 6
Be sure the toner cartridge is seated properly.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DocuMate 250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Xerox DocuMate 250

  • Page 1 Fig. 1 Using both hands gently open the front cover. Fig. 2 Select the toner cartridge that needs to be replaced. Fig. 3 Pull the toner cartridge indicated in the message on the display out. Note: “Y” stands for Yellow, “M” for Magenta, “C” for Cyan, and “K” for Black.
  • Page 2: Quick Start Guide

    Fig. 7 Close the front cover. Type of Consumable/Periodical Part Number Replacement Part Black Toner(Western Hemisphere) 006R01219 Yellow Toner [Y] (Western Hemisphere) 006R01220 Megenta Toner [M] (Western Hemisphere) 006R01221 Cyan Toner [C] (Western Hemisphere) 006R01222 Black Toner (Eastern Hemisphere) 006R01223 Yellow Toner [Y] (Eastern Hemisphere) 006R01224 Megenta Toner [M] (Eastern Hemisphere)

This manual is also suitable for:

Dc240 - docucolor 240 color laserDocucolor 240

Table of Contents