Loading Paper In The High Capacity Feeder - Xerox DocuColor 240 Supplementary Manual

Loading Paper in the High Capacity Feeder

The HCF can hold up to 2000 sheets of 8.5" x 11" 20lb bond. This procedure
shows you how to load paper into the High Capacity Feeder.
1. Register the stack of paper or media against the front right side of the
paper tray. The paper or media must not be loaded above the maximum
fill line.
2. Move the paper guide to just touch the edges of the stack.
If enabled by your System Administrator, the Paper Tray settings screen may be
displayed on the touch screen. Alternatively, you can change the Paper Size and
Paper Type by touching the All Services button on the control panel, then
selecting Setup Menu and Paper Tray Attributes on the touch screen.
The Paper Type screen allows you to select the paper type (Heavyweight,
Transparency, Tabs, Hole Punched, etc.) from a list of available paper types. If
enabled by your System Administrator, the Paper Type screen may also allow
you to specify the color of the paper loaded into the tray. After you have made
your Paper Type selection (and Paper Color selection, if applicable), touch the
Save button.
This paper tray automatically detects the dimensions of standard sized paper.
For standard paper sizes, you will not need to change the Paper Size settings.
However, you will need to specify a Paper Size value if you load a non-standard
paper size.
DocuColor 240/250 Training and Information Guide
DocuColor 240/250
38