Xerox DocuColor 240 Supplementary Manual page 26

Electrical Safety
Use only the power cord supplied with this equipment.
Plug the power cord directly into a grounded electrical outlet. Do not use an
extension cord. If you do not know whether or not an outlet is grounded, consult
a qualified electrician.
This equipment is to be used on a 120V, 20A branch circuit. If this machine
needs to be moved to a different location, contact a Xerox service representative
or your authorized local representative or service support organization.
Improper connection of the equipment-grounding conductor can result in
electrical shock.
Do not place this equipment where people might step on or trip on the power
cord.
Do not place objects on the power cord.
Do not override or disable electrical or mechanical interlocks.
Do not obstruct the ventilation openings.
Never push objects of any kind into slots or openings on this equipment.
If any of the following conditions occur, switch off the power to the machine
immediately and disconnect the power cord from the electrical outlet. Call an
authorized local service representative to correct the problem.
- The equipment emits unusual noise or odors.
- The power cord is damaged or frayed.
- A wall panel circuit breaker, fuse, or other safety device has been tripped.
- Liquid is spilled into the copier/printer.
- The equipment is exposed to water.
- Any part of the equipment is damaged.
Never use a plug that lacks an earth connection terminal to connect the product
to an electrical outlet.
This equipment should not be placed in a built-in installation unless proper
ventilation is provided. Please contact your Authorized local dealer for further
information.
Never locate the equipment near a radiator or any other heat source.
Do not put your hands into the fuser area, located just inside the exit tray area,
as you may be burned.
Do not use pressurized air-spray cleaning aids on or in this equipment. Some
pressurized air-spray containers contain explosive mixtures and are not suitable
for use in electrical applications. Use of such cleaners can result in a risk of
explosion and fire.
DocuColor 240/250 Training and Information Guide
DocuColor 240/250
26