Sleep Mode - Xerox DocuColor 240 Supplementary Manual

Sleep Mode

In this mode, the power is lowered more than in the Low Power mode.
The touch screen goes out, and the Power Saver button on the control panel
lights.
To use the machine, press the Power Saver button. The Power Saver button
goes out to indicate that the Power Saver feature is canceled.
In both Low Power Mode and Sleep Mode the touch screen is blank and the
Power Save indicator light is on. The machine is re-activated if the touch screen
or any button on the control panel is touched, the Document Handler is loaded, a
paper tray opened, a job is submitted to the print queue (fax receive or network
print), or a fax or print job arrives in the print queue. The machine responds
within one second and all the features are available within 30 seconds from Low
Power Mode or 120 seconds from Power Save Mode.
NOTE: The machine will not exit Power Save Mode if a fax job arrives and
the fax enabled paper trays are empty. The job will be held in
memory until either the control panel is touched or paper is loaded.
In addition to the power save modes your system administrator can enable Auto
Off. This feature automatically switches your machine off, instead of entering
Power Save Mode. As delivered, this feature is disabled. If enabled the machine
automatically switches into Auto Off, 60 minutes after the machine has entered
the Low Power mode. The factory default setting of 60 minutes is customer
changeable within the range of 0 to 120 minutes. The Auto Off feature is NOT
available for networked machines.
DocuColor 240/250 Training and Information Guide
DocuColor 240/250
12