Advanced Finisher - Xerox DocuColor 240 Supplementary Manual
Xerox docucolor 240: supplementary guide
Hide thumbs
Also See for DocuColor 240:
- Quick start manual (47 pages) ,
- Release note (34 pages) ,
- Evaluator manual (18 pages)
Table of Contents
Advertisement
DocuColor 240/250
Advanced Finisher
This output device provides a wide range of finishing options.
The Right Top Tray is used for stacked output, and can receive up to 500
sheets of paper. The Right Bottom Tray is used for offset and/or stapled output,
and can hold up to 1500 sheets. Both trays can be used for hole punched output
(optional).
The machine can finish your copies with one or two staples. Up to 50 sheets of
paper from 8" x 10" to 11" x 17" paper can be stapled in a set although if covers,
inserts or heavier paper is used this number will reduce. The staple cartridge
holds 5,000 staples.
Your machine will be set to either 2 hole/4 hole punch, or 2 hole/3 hole punch.
Each sheet is punched individually so there is no limit to the numbers in the set.
Hole punching can only be selected for 8.5" x 11" long edge feed and 11" x 17"
paper and can be combined with a stapling option.
DocuColor 240/250 Training and Information Guide
93
Advertisement
Table of Contents
