Sample Set - Xerox DocuColor 240 Supplementary Manual

DocuColor 240/250

Sample Set

When copying a large number of sets, use the Sample Set feature to review a
proof copy. You can ensure that the proof copy is exactly what you expected,
before printing the remaining sets. You can access the sample set feature from
the Job Assembly tab.
Switch the sample set on and press the Save button. Load the documents in the
document handler and program the job requirements. Enter the quantity required
and press the Start button.
One copy set of the job, the sample set, is printed. The remainder of the job is
held. After the sample set is printed, the machine will pause. You will be able to
change settings, change quantities, cancel the job, or start the job.
If the sample set is acceptable, select the Start button. The programmed
number of sets will be produced. If the sample set is unacceptable, select the
Cancel button.
DocuColor 240/250 Training and Information Guide 72