Paper Tray Attributes And Image Quality - Xerox DocuColor 240 Supplementary Manual

Paper tray Attributes and Image Quality

Whenever you change paper in a paper tray, you will need to change the paper
type and paper size values on the Paper Tray Settings screen.
You can access the Paper Tray Settings screen in one of three ways:
1. When you close the paper tray, the Paper Tray Settings window will
appear, allowing you to change the paper size and paper type. This
feature must be enabled by a System Administrator.
2. Touch the Setup Menu button on the All Services screen. Then touch the
Paper Tray Attributes button. Select the appropriate tray on the touch
screen, then touch the Change Settings button.
3. Access the System Administration menu. Touch System
Settings/System Settings/Common Settings. Touch the Paper Tray
Settings button, then touch the Paper Tray Attributes button. Select the
appropriate tray on the touch screen, then touch the Change Settings
button.
It is also important to change the Image Quality settings for specific paper you
may be using. Access the Image Quality settings for Paper via the following path:
1. Press the Log In/Out button.
2. Input Password and select Confirm.
3. Select System Settings.
4. Select System Settings.
5. Select Common Settings.
6. Select Paper Tray Settings.
7. Select Image Quality.
The Image Quality screen allows you to select and change the settings for a
each of the papers listed to optimize image quality. To change the settings for a
specific paper, select the paper in the list, then touch the Change Settings
button.
DocuColor 240/250 Training and Information Guide
DocuColor 240/250
106