Ozone Safety - Xerox DocuColor 240 Supplementary Manual

DocuColor 240/250
Operator Accessible Areas
This equipment has been designed to restrict operator access to safe areas only.
Operator access to hazardous areas is restricted with covers or guards, which
would require a tool to remove. Never remove these covers or guards.
Maintenance
Any operator product maintenance procedures will be described in the user
documentation supplied with the product.
Do not carry out any maintenance on this product, which is not described in the
customer documentation.
Do not remove covers or guards that are fastened with screws. There are no
parts behind these covers that you can maintain or service.
Do not perform any maintenance procedures unless you have been trained to do
them by an authorized local dealer or unless a procedure is specifically described
in the user documentation.
Cleaning your Product
Before cleaning this product, unplug the product from the electrical outlet. Always
use materials specifically designated for this product, the use of other materials
may results in poor performance and may create a hazardous situation. Do not
use aerosol cleaners, they may be explosive and flammable under certain
circumstances.

Ozone Safety

This product will produce ozone during normal operation. The ozone produced is
heavier than air and is dependent on copy volume. Providing the correct
environmental parameters as specified in the Xerox installation procedure will
ensure that the concentration levels meet safe limits.
If you need additional information about ozone, please request the Xerox
publication Ozone by calling 1-800-828-6571 in the United States and Canada. In
other markets, please contact your authorized local dealer or Service Provider.
DocuColor 240/250 Training and Information Guide 27