Vertiv NetSure 731 C62 Series User Manual page 8

Vertiv™ NetSure™ 731 C62 Series Power System User Manual
Personal Protective Equipment (PPE)
DANGER! ARC FLASH AND SHOCK HAZARD.
Appropriate PPE and tools required when working on this equipment. An appropriate flash protection
boundary analysis should be done to determine the "hazard/risk" category, and to select proper PPE.
Only authorized and properly trained personnel should be allowed to install, inspect, operate, or maintain the
equipment.
Do not work on LIVE parts. If required to work or operate live parts, obtain appropriate Energized Work Permits
as required by the local authority, per NFPA 70E "Standard for Electrical Safety in the Workplace".
Hazardous Voltage
DANGER! HAZARD OF ELECTRICAL SHOCK.
More than one disconnect may be required to de-energize the system before servicing.
Handling Equipment Containing Static Sensitive Components
ALERT! Installation or removal of equipment containing static sensitive components requires careful handling.
Before handling any equipment containing static sensitive components, read and follow the instructions
contained on the Static Warning Page.
Maintenance and Replacement Procedures
CAUTION! When performing any step-in procedures that requires removal or installation of hardware, use
caution to ensure no hardware is dropped and left inside the unit; otherwise service interruption or equipment
damage may occur.
NOTE! When performing any step-in procedures that requires removal of existing hardware, retain all hardware
for use in subsequent steps, unless otherwise directed.
viii