Vertiv NetSure 731 C62 Series User Manual page 63

Parameter Range
48V/100
48V/300
System Type 48V/500
48V/1000
48V/SET
Capacity 20Ah ~ 5000Ah
Factory setting Value description
The system type of the controller has been set according to the actual instance
before the controller is delivered with power supply system. You do not need to
change the value except that the controller needs to be replaced with a new one.
48V/300
After changing the type, the controller will restart and other parameters will
resume the default. You need to reset and change some parameters according to
the battery and equipment configured with the system
The capacity of the total batteries connected with each shunt. You should set this
300Ah
parameter according to the actual battery configuration
Vertiv™ NetSure™ 731 C62 Series Power System User Manual
33