Nautilus E616 Service Manual page 43

Using a 6mm hex key, remove the 4 bolts that attach the Incline
7.
Adjuster to the Rail Assembly. Set the hardware safely aside for
reassembly.
Place a static object (like a book or box) under the back of the main
8.
frame but not under the Rail Assembly. The static object (*) should not be
compressible.
Using a 6mm hex key, remove the 4 bolts that attach the Rail
9.
Assembly to the Frame Assembly.
Be aware that the Frame Assembly may be unstable and
slightly top heavy.
10. Remove the Rail Assembly.
The machine may be moved by one or more persons depend-
ing on their physical abilities and capacities. Make sure that
you and others are all physically fit and able to move the
machine safely.
NOTICE: This step may require two people.
11. Installation is the reverse procedure.
Note: Be sure Levelers are fully raised on Rail Assembly.
Be aware that the Frame Assembly may be unstable and
slightly top heavy. This step may require two people.
12.
13. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
13 mm
*
43