Nautilus E616 Service Manual page 12

2. All LEDs Off 1 second
3. Sequence Segments 1 at a time – on 1 second, off 1 second
Press any key to exit test
h. RUN LCD TEST – Drives 3x5 and 1x5 LCD displays with the following patterns:
1. All segments on
2. All segments off
3. Set individual segments one at a time until all segments are illuminated.
Press any key to exit.
i. RESET CONSOLE – Resets the data from user inputs. The Console setup, user records and workout records will be
reset to defaults. This option does not reset MFG NVM (non volatile memory).
13. The Console display shows the Software Version prompt.
14. For the next prompt, push the OK button.
15 . The Console will display the Power-Up Mode screen.
Console Service Mode – x616 series (MY17) Consoles
Note:
3. Push OK to set.
5. Push OK to set.
Note:
7. Push OK to set.
9. Push OK to set.
12
-