Nautilus E616 Service Manual page 41

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet
and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure
location.
Note: Your machine may not match the image. For reference only.
Be sure the Incline Assembly on the Rail Assembly is fully lowered.
1.
Be sure the area below the machine is clear before lowering.
the rail assembly, or push the 0% Incline Level Quick Button.
Disconnect all power and allow to sit for 5 minutes.
Carefully lift the Leg and Pedal together to move the Roller off the
2.
have access to the hardware that attaches the Incline Adjuster to the Rail
Assembly, continue to Step 7.
If additional space is required for removal and installation, continue to
Step 3.
Loosen and remove the 4 screws from the Handlebar Shrouds.
3.
Remove the Handlebar Shrouds and set them safely aside.
) button to change the incline angle of
X4
#2
Console-static handlebar not shown for clarity
41