Nautilus E616 Service Manual page 44

™
NOTICE: This document provides instructions for the replacement of the Transport Wheels, Front Endcaps and Footpads on the Nautilus
and U616 Upright Bikes, R614 and R616 Recumbent Bikes, and E614 and E616 Elliptical Fitness Machines (Model Year 2014 and 2017).
If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S.
www.nautilusinternational.com | © 2014 Nautilus, Inc. | Nautilus and the Nautilus logo are trademarks owned by or licensed to Nautilus, Inc., which are registered or otherwise protected by
common law in the United States and other countries. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY
Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:
Read and understand the Service Manual before working on the machine. Failure to obey the instructions and safety warnings could
cause injury to the service technician or bystanders.
Disconnect all power to the machine before you service it.
Tools Required (not included)
6mm hex key
#2 Phillips screwdriver (short)
13mm open end wrench
Replace the Transport Wheels, Endcaps and Footpads on the
Nautilus
™
™
U/R/E 614/616 Bikes and Elllipticals
Static solid object (like a book or box)
44
Replacement Procedure
Skill Level: II
8008076.081519.B
U614
™