Table of Contents
Advertisement
8
T10F
2
Design and function
Strain gauges (S/G) have been mounted on the measuring body. The rotor
electronics for bridge-excitation-voltage and measuring-signal transmission is
located centrically in the flange. The transmitter coils for the non-contact
transmission of excitation voltage and measuring signal are located on the
measuring body's outer circumference. The signals are transmitted and
received by a divisible antenna ring. The antenna ring is mounted on a
housing that includes the electronic system for voltage adaptation and signal
conditioning. The torque flanges consist of two separate parts: the rotor and
the stator. The rotor includes the measuring body and the adapter flange.
The stator includes the 7-pin connector plug (Binder 723) for the torque signal
and the voltage supply. The antenna ring should be mounted concentrically
around the rotor (see chapter 3).
Antenna segments
Stator
Rotor
Fan-type lock washers
Housing
Measuring body
Adapter flange
Fig. 2.1: Mechanical structure, explosive representation
Advertisement
Table of Contents
