Attaching The Side Wall - Henny Penny FlexFusion FPG-221 Additional Installation, Operation And Maintenance Instructions

7.1.2 Attaching the Side Wall

NOTICE
Risk of property damage from leaky housing
• Check gaskets when attaching the housing parts.
• Replace damaged gaskets.
1. Insert top edge of side wall.
2. Slide the side panel into the guide at the bottom.
3. Insert the screws in the middle of the side panel and screw them on
loosely.
if necessary, lift the side wall slightly.
4. Tighten the screws under the unit.
5. Tighten the screws in the center.
6. Check that the side wall is in contact with the unit on all sides.
Maintenance instructions
Opening and closing the housing
21