Table of Contents
Advertisement
Dentsply Sirona
Operating Instructions inEos X5
64 17 096 D3586
D3586.201.01.16.02 2023-12
9.1.3
Scan modes
You can perform scans in two modes: "Model" or "Impression" . You can
switch between the modes with the "Scan Mode" function.
"Single Exposure"
Use the "Single Exposure" mode for scans with models with no special
requirements in terms of the brightness settings for the exposure
(default value).
"Multiple (HDR) Exposure"
The HDR ("high dynamic range") mode captures situations requiring a
large dynamic range (differences in brightness) during the exposure.
This mainly concerns material mixes, for example:
● Dark plaster
● Abutments covered with Optispray
● When using scan wax
● When measuring scanbodies
● When capturing silicon impression trays with several multi-colored
impression materials
inEos X5 captures these situations using multiple exposure, so that
every part of the surface is measured with the optimal exposure setting.
Accordingly, the scan takes longer.
9 Performing 3D acquisition
9.1 General
39
Advertisement
Table of Contents
