Scan Modes; Scan Options; D3586 - Dentsply Sirona inEos X5 Operating Instructions Manual

9 Performing 3D acquisition
9.1 General
36
9.1.2

Scan modes

You can take the scans using two modes. You can switch between the
modes using the "Mode" function.
"Single Exposure"
Use the "Single Exposure" mode for scans of models with no special
requirements in terms of the brightness settings for the exposure
(standard value).
"Multiple (HDR) Exposure"
The HDR ("high dynamic range") mode captures situations requiring a
large dynamic range (differences in brightness) during the exposure.
This mainly concerns material mixes, for example:
● Dark plaster
● Abutments covered with Optispray
● When using scan wax
● When measuring scanbodies
● When capturing silicon impression trays with several multi-colored
impression materials
inEos X5 captures these situations using multiple exposure, so that
every part of the surface is measured with the optimal exposure setting.
Accordingly, the scan takes longer.
9.1.3

Scan options

You can use the free scan option to capture models and impressions.
Scanning single jaw impressions
1. Click the "Acquisition Options" button.
2. Click on the "Toggle Impression Scan" button.
Ä The icon for the impression scan is displayed in the live image.
3. Select the image catalog.
4. Start the acquisition procedure.
Triple Tray scanning
1. Click on the "Options" button.
2. Click on the "Toggle DoubleArch" button.
Ä The icon for the double arch impression scan is displayed in the
live image.
Dentsply Sirona
Operating Instructions inEos X5

64 17 096 D3586

D3586.201.01.11.02 07.2018