Table of Contents
Advertisement
6 Initial startup
6.6 Updating the firmware
30
6.6
Updating the firmware
In order to update the inEos X5 firmware, proceed as follows:
1. Click the "Devices" icon in the system menu.
2. Click on the icon of inEos X5.
3. Click on "Update Firmware" .
4. Switch inEos X5 off at the main switch.
5. Then simply proceed as prompted by the inLab software.
Ä The inEos X5 firmware will be updated. The percentage of
completed progress is displayed.
IMPORTANT
Do not disconnect the unit from the power supply
During the firmware update, ensure that the unit is not disconnected
from the power supply.
6. Once the update is complete, confirm the message with "Ok" and
switch off the inEos X5.
7. Turn the inEos X5 back on.
8. Click on "Continue" in order to exit the configuration and continue
with the inLab SW.
Dentsply Sirona
Operating Instructions inEos X5
64 17 096 D3586
D3586.201.01.16.02 2023-12
Advertisement
Table of Contents
