Example Applications; Scanning A Crown Preparation - Dentsply Sirona inEos X5 Operating Instructions Manual

9 Performing 3D acquisition

9.6 Example applications

50
9.6 Example applications
9.6.1

Scanning a crown preparation

1. Create a case ( "Crown" ) in the ADMINISTRATION phase.
2. Then continue to the SCAN phase.
Ä The preparation to be scanned is pre-selected in the object list.
3. Place the stump in the tray provided for that purpose and press the
green "Start scan" button
(optional, only when saw-cut model is available).
4. Return the stumps to the model.
5. Continue to the next step in the step menu for scanning the jaw and
start the scan process using the green "Start scan" button.
Optionally, you can also select "Reduced Capturing" in the object
list.
Dentsply Sirona
Operating Instructions inEos X5
64 17 096 D3586
D3586.201.01.16.02 2023-12