Making A Blind Transfer; Call Waiting - Avaya J139 Manual

• Press the Team line key to transfer the call to the configured team button.
You must configure the team button to use as your target selection.
3. To initiate a consultative transfer, press Talk.
The call transfer recipient's phone starts ringing.
4. Do one of the following:
• Press Complete after the recipient answers the call.
The call transfer is complete. This is also called attended transfer.
• Press Complete after the recipient's number starts ringing.
The call transfer is complete. This is also called unattended transfer.

Making a blind transfer

About this task
Use this procedure to transfer an active call without connecting a call with the transfer recipient.
Before you begin
Ensure that your administrator enables the feature.
Procedure
1. While on an active call, press Transfer.
The phone displays the Enter Transfer Destination screen.
2. Do one of the following and then press the Call soft key:
• Dial the number to which you want to transfer the call.
• Search for the number in the Contacts or Recents list.
3. To initiate a blind transfer, press Now.
The call transfer is complete.

Call Waiting

With the Call Waiting feature, you can get a notification about another incoming call even when
you are on a call. If this feature is enabled, the caller is put on waiting instead of hearing a busy
tone.
The phone displays incoming call screen, plays incoming call ringtone, and the beacon LED
flashes.
January 2024 Using Avaya J139 SIP IP Phone in Avaya Cloud Office
Comments on this document? infodev@avaya.com
Call Waiting
™
51