Table of Contents
Advertisement
3.4.9
Installation of the Anti-Toppling Brackets for the System
Force H3 system is equipped with two anti-toppling brackets as follows.
Such brackets act as an alternative of ground mounting of the battery system. Customers can
choose either of the following methods for the system installation:
ground mounting with 4*M8 expansion bolt to the support surface (see section 3.4.5).
bracket mounting with 2*M8 expansion bolt to the wall (Battery system still needs to be
placed on the support surface for supporting the overall weight.)
As long as the installation area meets the requirement of the installation site (see section 3.4.3),
in either case the installation stability is guaranteed.
The detailed installation process with such brackets are as follows:
1. Put the base along the wall and reserve 40mm distance between back of the base and the
wall.
33
Advertisement
Table of Contents
