Smart Access Anywhere Application; Figure 2-11 - Viavi AVX-10K Operation Manual

When you run the VNC viewer software, you will need to know the IP Address of the
AVX-10K test set. This can be found by launching the Network application in the System
ribbon.
View the Device UI Remotely
1. Ensure that the AVX-10K is connected to the Internet.
2. Enable VNC capability:
a. Open the System Settings Menu.
b. Select Remote Operation button.
c. Select VNC button.
d. Select the Enable VNC Server check box.
e. Define VNC password (recommended).
f. Select Back Button to return to previous screen.
3. Launch the VNC viewing application on the computer.
4. Enter the IP address of the test set in the VNC viewer's server address field and select
the OK Button to continue.
5. Enter the VNC password (found on the Remote Operation menu) and press the OK
Button to submit.
2.3.3

Smart Access Anywhere Application

VIAVI's Smart Access Anywhere (SAA) application allows a remote user to be able to
connect with the test set. This could be a lead technician who is currently offsite or the
VIAVI Service personnel. Both the AVX and the remote user must have access to the
Internet.
SAA can be downloaded from the VIAVI website:
https://www.viavisolutions.com/en-us/software-download/smart-access-anywhere-saa-so
ftware. Here you can download versions for the PC, Android, or Apple. Once downloaded
and installed, this application connects to the AVX-10K using a code that is generated on
the AVX and supplied to the remote user.
22135254
January 2024
Figure 2-11 IP Address & Network ID
•
A password entry box appears.
• The AVX-10K test set user interface appears in the VNC viewer.
AVX-10K Operation Manual
Chapter 2 Setup, Control, and Operation
Remote Operation
Rev 004
2 - 13