Run Transponder Auto Test - Viavi AVX-10K Operation Manual

Setting
Diversity (on, off)
Altitude Settings
Power Units
Advanced – RAD47

4.1.2 Run Transponder Auto Test

With the Transponder AUTO TEST ribbon expanded, you will see that the Test
Configuration Box is shaded identifying it as an active field. By selecting this, it will show
all available test configurations. Select desired test from the provided list.
NOTE: Transponder class and option identification are found on the transponder's TSO
label.
22135254
January 2024
Table 4-1 XPDR Auto Test Unique Settings
AVX-10K Operation Manual
Definition
Set to 'On' to test both top and bottom
antennas for a diversity system and Diversity
Isolation Test
This item gets enabled when ALTITUDE
CHECK is selected as the Test Configuration.
Here you can enter various Altitudes that will
get stepped through when running the
ALTITUDE CHECK test.
Allows for measured power to be displayed
in Watts or dBm.
An Australian directive for civil aviation where
the reply pulse width is between 0.35 to 0.55
us and amplitude variation (droop) is not
greater than 1dB. Set to ON if applicable.
Chapter 4 Transponder
XPDR Auto
Rev 004
4 - 3