8.3.3 Run ELT 121.5 / 243 Beacon
Once you are connected to the ELT or ready to test over-the-air, select either or both
"Enabled 121.5" and "Enabled 243" and then select the RUN key in the lower right corner.
All measured and decoded fields will be displayed. Click Save Profile key to capture the
information for review.
22135254
January 2024
Figure 8-4 ELT 1212.5 / 243 Beacon
AVX-10K Operation Manual
Chapter 8 ELT (Emergency Location Transmitter)
Run ELT Application
Rev 004
8 - 9