Gicb; Figure 4-22 - Viavi AVX-10K Operation Manual
Flight line test set
Hide thumbs
Also See for AVX-10K:
- Operation manual (147 pages) ,
- Getting started manual (21 pages) ,
- Operation manual (101 pages)
Table of Contents
Advertisement
Chapter 4 Transponder
GICB
When running this test, the returned values can include:
• INTERVAL TIME (squitter has been captured)
• NO SQUITTER (squitter not captured)
• NO REPLY (no squitter was received)
• NOT RUN (test has not yet been run)
• BAD SETUP – This can happen for a number of reasons:
4.4
GICB
GICB mode fully decodes and displays all Enhanced Surveillance BDS register contents.
Rev 004
4 - 20
1. An ADS-B Version Number earlier than DO-260B is being broadcast
2. The RF input was overloaded at the beginning of the test (usually indicates
that antenna range/height and/or cable loss values are incorrect).
Figure 4-22 Transponder GICB Application
AVX-10K Operation Manual
22135254
January 2024
Advertisement
Table of Contents
