Viavi AVX-10K Operation Manual page 80

Server Address - Enter the DNS address for the server. The default address is:
"https://stratasync.viavisolutions.com"
Server Port - Enter the server port number. The default port is: 443
3. Select the Start button. As the process runs, the sync state is displayed on the screen.
• Upon synchronization with the StrataSync™ server, the device will send the
following information to the server:
If the configuration information contained on the server is newer than the information on
the unit, the server will be considered to be the most up-to-date.
• The server will then send any files to the unit being synchronized that it determines
are newer than those on the unit.
• The device will then send any Reports, Configuration profiles, XML results, screen
shots, etc. that have been saved on the unit since the last configuration.
• The server then applies any applicable Options to the device.
• If any upgrades are available, the user will be informed of the update availability
and offered the choice to upgrade.
• When synchronization is complete, the Status will indicate "Sync Complete". The
device may be disconnected from the server.
22135254
January 2024
2. Open the System menu and select the StrataSync™ button. The StrataSync™
settings menu appears.
• Specify the settings:
StrataSync™ Account ID - Enter the account identification number. Only change
this if necessary.
StrataSync™ Tech ID/User ID- Enter the technician/user identification number.
• The device's serial number.
• The device's hardware information - assemblies and their revision levels.
• The device's MAC address.
• The device's User settings - name (user/technician) and ID.
• Software update milestones (includes status and warnings, if applicable)
AVX-10K Operation Manual
Chapter 2 Setup, Control, and Operation
Establishing Network Connections
Rev 004
2 - 33