Smart Access Anywhere Application; Figure 10: Ip Address & Network Id - Viavi AVX-10K Operation Manual

When you run the VNC viewer software, you will need to know the IP Address of the AVX-10K test set.
This can be found by launching the Network application in the System ribbon.
View the Device UI Remotely
1. Ensure that the AVX-10K is connected to the internet.
2. Enable VNC capability:
a. Open the System Settings Menu.
b. Select Remote Operation button.
c. Select VNC button.
d. Select the Enable VNC Server check box.
e. Define VNC password (recommended).
f. Select Back Button to return to previous screen.
3. Launch the VNC viewing application on the computer.
4. Enter the IP address of the test set in the VNC viewer's server address field and select the OK
Button to continue.
A password entry box appears.
•
5. Enter the VNC password (found on the Remote Operation menu) and press the OK Button to
submit.
• The AVX-10K test set user interface appears in the VNC viewer.
2.3.3.

Smart Access Anywhere Application

VIAVI's Smart Access Anywhere (SAA) application allows a remote user to be able to connect with the
test set. This could be a lead technician who is currently offsite or the VIAVI Service personnel. Both
the AVX and the remote user must have access to the internet.
SAA can be downloaded from the VIAVI website – www.viavisolutions.com. Search for "Smart Access
Anywhere" and go to the products page, then Resources tab, then Software Downloads. Here you can
download versions for the PC, Android, or Apple. Once downloaded and installed, this application
connects to the AVX-10K using a code that is generated on the AVX and supplied to the remote user.
Rev. 002
22135254
Figure 10: IP Address & Network ID
VIAVI
AVX-10K Operation
2022-08-25
Page 23 of 139