3.2
Common Setup Parameters
There are settings that are duplicated across many applications within the AVX-10K. This
section will detail those common settings of applicable test applications from the SETUP
tab. These include:
• "RF Port" (Antenna, Direct Connect, Direct Connect with Coupler)
• "Antenna Settings" (Range, Height, Gain [1.03 GHz, 1.09 GHz])
• "Cable Settings" (Cable Length, Cable Loss)
• "Coupler Settings"
• "UUT Address"
• "Position Settings" (Entry Method, Latitude, Longitude, Format)
• "Advanced Settings" (Check All UUT Capability, Verify Unit Setup Configuration)
All application-specific settings will be discussed in the associated application sections
below.
22135254
January 2024
Figure 3-6 Example Setup Tab
AVX-10K Operaton Manual
Chapter 3 Test Application Common Settings/Steps
Common Setup Parameters
Rev 004
3 - 5