Security > Smart Binding > Smart Binding; Security > Smart Binding > White List - D-Link DGS-1210 Series Manual

4 Web-based Switch Configuration
D-Link Smart Managed Switch User Manual
find a match in the white list, the packets from that MAC address are unblocked. If not, the MAC address will
stay blocked. While the mode examines every ingress ARP and IP packet, it enforces better security.
DHCP Snooping: By enable DHCP Snooping, the switch will snoop the packets sent from DHCP Server and
clients, and update information to the White List. This includes DHCPv6 snooping.
Click the Apply button to implement changes made.
Security > Smart Binding > Smart Binding
The Smart Binding Settings page allows users to set IP-MAC-Port Binding entries by manually entering
required information, or by scanning all connected devices and clicking to bind.
Figure 4.124 – Security > Smart Binding > Smart Binding
The Manual Binding Settings contains the following fields:
From Port / To Port: Specifies the switch port ranges for which to configure this IP-MAC binding entry (IP
Address + MAC Address).
IP Address: Specifies the IP address to bind to the MAC address set below.
MAC Address: Specifies the MAC address to bind to the IP address set above.
Click Add to add a new entry.
Auto Scan: The Auto Scan Setting can list connected devices and easily select to bind. It contains the
following fields:
IP Address From/To: Specifies the range of IP Address to find desired devices, or leaves the fields blank to
see all connected devices.
Click Scan and the search results will be listed in below table.
Binding: check the box to select desired binding devices.
Apply: click Apply to set IP-MAC-Port Binding entries."
Select All: to check the boxes of Binding for all found devices.
Clear All: to cancel the box of Binding
Security > Smart Binding > White List
When "IP + ARP Inspection" Mode is selected, the White List page displays finished IP-MAC-Port Binding
entries from page Smart Binding. Only IP packets or ARP packets carrying matched IP-MAC-Port
information can access to the switch. White list entry can be deleted if there is need.
98