Snmp > Rmon > Rmon History; Snmp > Rmon > Rmon Alarm - D-Link DGS-1210 Series Manual

4 Web-based Switch Configuration
D-Link Smart Managed Switch User Manual
Figure 4.162 - SNMP > RMON > RMON Ethernet Statistics Configuration
The RMON Ethernet Statistics Configuration contains the following fields:
Index (1 - 65535): Indicates the RMON Ethernet Statistics entry number.
Port: Specifies the port from which the RMON information was taken.
Owner: Displays the RMON station or user that requested the RMON information.
Click Add to make the configurations take effects and click Refresh to redisplay the table information.
SNMP > RMON > RMON History
The RMON History Control Configuration page contains information about samples of data taken from ports.
For example, the samples may include interface definitions or polling periods.
Figure 4.163 - SNMP > RMON > RMON History Control Settings
The History Control Configuration contains the following fields:
Index (1 - 65535): Indicates the history control entry number.
Port: Specifies the port from which the RMON information was taken.
Buckets Requested (1 ~ 50): Specifies the number of buckets that the device saves.
Interval (1 ~ 3600): Indicates in seconds the time period that samplings are taken from the ports. The field
range is 1-3600. The default is 1800 seconds (equal to 30 minutes).
Owner: Displays the RMON station or user that requested the RMON information.
Click the Apply button to implement changes made.
SNMP > RMON > RMON Alarm
The RMON Alarm Settings page allows the user to configure the network alarms. Network alarms occur
when a network problem, or event, is detected.
126