6 Command Line Interface
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
DGS-1210-52> reboot
% Device will reboot, please wait a few minutes to re-login.
DGS-1210-52>
reset config
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
DGS-1210-52> res et c onfig
% Device will reboot after reset configuration successfully.
DGS-1210-52>
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings:
DGS-1210-52> s how ipif
To reboot the Switch. If the Switch is a member of a stack, it may
be rebooted individually, without affecting the other members of
the stack.
reboot
The reboot c ommand reboots the system. All network
connections are terminated and the boot code executes.
None.
None.
To reset the Switch to the factory default settings.
res et c onfig
All configurations will be reset to the default settings.
None.
None.
To display the configuration of an IP interface on the Switch.
s how ipif
The s how ipif c ommand displays the current IP address of the
switch.
None.
None.
9
5
9
5
D-Link Web Smart Switch User Manual