Flash Information; Nuclias Connect Setting - D-Link DGS-1210 Series Manual

4 Web-based Switch Configuration
HTTP: Backup or upgrade the firmware via HTTP protocol.
Backup firmware to file: Select image_id 1 or image_id 2 from drop-down list.
Click Backup to execute backup procedure.
Upgrade firmware from file: Select the firmware file for local drive by click Choose File.
Click Upgrade to execute upgrade procedure.
TFTP: Backup or upgrade the firmware via TFTP protocol.
TFTP Server IP Address: Entering the TFTP server location via IPv4 address, IPv6 address or Domain
name string.
TFTP File Name: The specific file name used for upgrade or backup actions.
Backup firmware to file: Select Image_id1 or Image_id 2 from drop-down list.
Click Backup to execute the backup procedure.
Click Upgrade to execute the upgrade procedure.

Flash Information

This page displays the flash detail information of the Switch.

Nuclias Connect Setting

This page contains the Nuclias Connect Settings of the Switch.
Figure 4.15 – Tool Menu > Firmware Backup and Upload
CAUTION: Do not disconnect the PC or remove
the power cord from device until the upgrade
completes. The Switch may crash if the
Firmware upgrade is incomplete.
Figure 4.16 – Tool Menu > Flash Information
3
3
D-Link Smart Managed Switch User Manual
3
3