Reset Config; Reset System; Logout - D-Link DGS-3024 - Switch Manual

DGS-3024 Gigabit Ethernet Switch Manual

Reset Config

The Reset Config option will reset all of the Switch's configuration parameters to their factory defaults, without saving these
default values to the Switch's non-volatile RAM. If the Switch is reset with this option enabled, and Save Changes is not
executed, the Switch will return to the last saved configuration when rebooted.
Figure 11- 10. Reset Config window

Reset System

In addition, the Reset System option is added to reset all configuration parameters to their factory defaults, save these parameters
to the Switch's non-volatile RAM, and then restart the Switch. This option is equivalent to Reset Config followed by Save
Changes.
Figure 11- 11. Reset System window

Logout

Use the Logout page to logout of the Switch's Web-based management agent by clicking on the Logout button.
Figure 11- 12. Logout Web Setups window
.
141