Invertek Drives Optidrive E3 ODE-3 Series User Manual page 29

Step 7.
Confi rm INT as the selected data type
Step 9.
Close the Select Module Type Window Close the Select Module Type Window
Step 11. Step 11.
Drive tags created in the Controller Tags Window Drive tags created in the Controller Tags Window
www.invertekdrives.com
Step 8.
(Optional) Adjust the RPI time in the Connection tab
Click OK button to save your settings
Step 10. Step 10.
OPT-3-ETHIG-IN device will be added to the project OPT-3-ETHIG-IN device will be added to the project
Version 1.02 | Fieldbus Guide | 29
8