Changing The Ip Address - Invertek Drives Optidrive E3 ODE-3 Series User Manual

7.4. Changing the IP Address

Go to Network settings screen:
The IP address can be assigned to the module manually by the User (Fixed or Static IP Address) or automatically by the DHCP Server. The IP address can be assigned to the module manually by the User (Fixed or Static IP Address) or automatically by the DHCP Server.
The default configuration method is Fixed IP address. The default configuration method is Fixed IP address.
7.4.1. Automatically (DHCP) Assigned IP Address 7.4.1. Automatically (DHCP) Assigned IP Address
To automatically (DHCP) assign an IP address to the module please select DHCP mode in the Configuration Method and To automatically (DHCP) assign an IP address to the module please select DHCP mode in the Configuration Method and
confirm changes by clicking APPLY NEW VALUES. confirm changes by clicking APPLY NEW VALUES.
NOTE A power cycle is necessary after changing the network settings. Please click REBOOT button at the top left corner or power NOTE A power cycle is necessary after changing the network settings. Please click REBOOT button at the top left corner or power
cycle the module! cycle the module!
7
20 | Fieldbus Guide | Version 1.02 www.invertekdrives.com