Table of Contents
Advertisement
Safety & Environmental Information
Cleaning
Cleaning
Clean the outside of Keysight products with a soft, lint-free, slightly dampened
cloth. Do not use detergent or chemical solvents.
Getting Started Guide
To prevent electrical shock, disconnect from Mains before cleaning.
Use a dry cloth or one slightly dampened with water to clean the external case
parts. Do not attempt to clean internally.
Cleaning connectors with isopropyl alcohol shall only be done with the
instrument's power cord removed and in a well-ventilated area. Allow all residual
alcohol moisture to evaporate and the fumes to dissipate prior to energizing the
instrument.
Keep isopropyl alcohol away from heat, sparks, and flame. Store in a tightly
closed container. The alcohol shall not be stored, or left open, in the area of the
equipment. Use isopropyl alcohol with adequate ventilation to prevent the
combustions of fumes or vapors.
Avoid contact with eyes, skin, and clothing, as isopropyl alcohol causes skin
irritation, may cause eye damage, and is harmful if swallowed or inhaled. It may
be harmful if absorbed through the skin. Wash thoroughly after handling. In case
of spill, soak up with sand or earth. Flush spill area with water. Dispose of
isopropyl alcohol in accordance with all applicable federal, state, and local
environmental regulations.
In case of fire, use alcohol foam, dry chemical, or carbon dioxide; water may be
ineffective.
11
Advertisement
Table of Contents
