Labels And Symbols - Keysight S9165A Getting Started Manual

Exterior Features

Labels and Symbols

Labels and Symbols
Labels and symbols which may be visible on the exterior of the S9165A are
described in the table below.
Figure 3-5 S9165A rear panel
Symbol
36
Description
This symbol is used to indicate power STANDBY mode (yellow in standby,
green when instrument is ON) and to mark the position of the instrument
power line switch.
This AC symbol is used to indicate the required nature of the line module
input power.
The instruction documentation symbol. The product is marked with this
symbol when it is necessary for the user to refer to instructions in the
documentation.
This symbol indicates that the power supply is protected throughout by
double or reinforced insulation.
This symbol indicates that the power output is DC.
This symbol indicates chassis ground.
The CE mark is a registered trademark of the European Community.
Getting Started Guide