Table of Contents
Advertisement
Connection Procedures
Connecting to the RRH
Connecting the cable assembly to the RRH
Figure 4-4
Cable assembly connections to the RRH
1. Connect the cables in the sequence illustrated above. The name on the
2. Tighten the connectors with a torque wrench.
Figure 4-5
Completed connections to the RRH
Getting Started Guide
When attaching cables to threaded connectors, use a torque wrench (90 N-cm,
8 in-lb).
cable end must match the name of the port you are connecting it to; the
colored labels in this illustration show where each cable end belongs.
43
Advertisement
Table of Contents
