Table of Contents
Advertisement
Connection Procedures
Location and Mounting
Location and Mounting
If possible, suspend the RRH above the DUT, so that heat given off by it will rise
away from the DUT.
Leave a minimum clearance of 2.5 inches (7 cm) around the RRH.
Ensure that there is enough room to attach all necessary cables between the
transceiver and other devices.
40
Do not place the transceiver against any surface in such a way as to block its
ventilation openings. Interfering with ventilation airflow can cause the
transceiver to overheat.
Getting Started Guide
Advertisement
Table of Contents
