Quick Start
Turn-on Procedure
USB Channel Assignments
Under the Tools menu of the Service Manager, select Assign USB Channels
as shown below. This opens a configuration window which allows you to edit
the mapping information by which hardware modules are associated with
channels. It will be necessary to do this any time you make a change to the
physical connections between any RRH and the S9165A; after saving your
changes here, run Restart Services on the Service Manager main window.
Figure 2-10
Assigning USB Channels
Function buttons
The eight buttons on the window are described below.
Button
Current
Default
Up
Down
Getting Started Guide
Purpose / Function
Load the RRH serial number list from a previously saved mapping; the list will be empty if no
saved mapping exists.
Load the RRH serial number list which the S9165A creates automatically by scanning current
connections. The list will be empty if no such connections have been found.
Move the selected serial number entry (that is, the highlighted entry -- click on another entry to
select it) up one position in the list. The button is disabled when there are no entries. Selecting
Up for the first entry causes it to wrap around and become the last entry.
Move the selected serial number entry (that is, the highlighted entry -- click on another entry to
select it) down one position in the list. The button is disabled when there are no entries.
Selecting Down for the last entry causes it to wrap around and become the first entry.
29