Model F8820B - Keysight S9165A Getting Started Manual

Connection Procedures
Connecting to the IBU

Model F8820B

Figure 4-10 Connections to the IBU (Model# F8820B)
— The two IF connections (Tx and Rx) between the instruments must be
— The LAN and 10 MHz Reference connections between the instruments are
— Because this IBU model has two LAN ports, it is usually not necessary to
Figure 4-11 Cable connections to the IBU (Model# F8820B)
Getting Started Guide
duplicated for each channel in the S9165. (These connections should be
tightened with a torque wrench.
not channel-specific; these do not need to be duplicated.
use a USB/LAN adpater to connect the S9165A to the IBU.
47