Table of Contents
Advertisement
Connection Procedures
Connecting to the RRH
Connecting the cable assembly to the S9165A
1. Connect the cables in the numerical sequence illustrated below. The name
2. Tighten the coaxial connections with a torque wrench.
Figure 4-6
S9165A-facing end of the cable assembly
Figure 4-7
Completed connections to the S9165A
44
When attaching cables to threaded connectors, use a torque wrench (90 N-cm,
8 in-lb).
on the cable end must match the name of the port you are connecting it
to; the colored labels illustrated here show where each cable end belongs.
Getting Started Guide
Advertisement
Table of Contents
