Shutdown; Schedule - Graco Therm-O-Flow 200 Instructions-Parts List Manual

Operation
Air pressure to the Air Motor will be immediately
relieved, which will stop movement of the Heated Pump
but allow the heater to remain operable.
The Ram Director Valve will also remain operable.
The Air Motor Slider Valve can be locked in the closed
position.
Total System Shutdown
To stop all electrical and most pneumatic processes,
turn the Main Power Switch OFF.
This will remove all electrical power to the system past
the Main Power Switch.
Air pressure to the Air Motor will be relieved, which will
stop movement of the Heated Pump.
The Ram Director Valve will remain operable.
The Main Power Switch can be locked in the open
position.
36

Shutdown

1. Press
CM
screen will say "Inactive". If using the Schedule
function, the heaters and Pump will be disabled
automatically at the set time. Only press
disable the heating system before the set time. If
the heaters were manually disabled, the Schedule
function will automatically enable them at the next
set time.
NOTE: Do not perform step 2 if using the Schedule
function. Leave the power on.
2. Turn the Main Power Switch OFF.

Schedule

The Schedule function allows the user to specify times
when the system will automatically turn on and off the
heaters and Pump.
to disable the heaters and Pump. The
to
334130W