Graco Therm-O-Flow 200 Instructions-Parts List Manual page 109

Advanced 4
Advanced 4 screen allows the user to view the software
contents within the Therm-O-Flow system, or to
reprogram the system with a software update.
To view the software contents, press the
icon. The screen will display the system software part
numbers and version numbers as shown below.
If the software contents do not fit onto one screen, the
user can navigate down to the next page by pressing
the down arrow key.
Press the right arrow key to view the serial numbers of
the software displayed on the next screen.
To reprogram the system with updated software, press
the soft key icon on the main Advanced 4 screen.
The screen will appear as shown below.
334130W
To update the software:
1. Transfer the updated TOF .gti file (with a filename
containing "17C050") onto a USB stick. Place the
file in a "\GRACO\SOFTWARE\" subdirectory.
2. Insert a black programming token into the token
slot of the ADM.
soft key
3. Insert the USB stick into the USB slot of the ADM. If
the USB download option is selected, a graphic of
a USB stick will appear after the download process
is completed. The graphic will appear with a
pull-down option control which allows the user to
select the file to transfer to the programming token.
4. If more than one Therm-O-Flow .gti file is present in
the "GRACO/SOFTWARE/" directory on the USB
stick, select the correct file to transfer using the
pull-down selection control.
5. Press the
token programming process.
6. During the file transfer process, a progress bar will
be displayed with a percentage completed
indicator below. This step may take a few minutes
to complete.
7. Once the percentage indicator reached 100%, the
bottom right soft key will change to
soft key to update the system. To update the
system (or another Therm-O-Flow system) at a later
time, remove the token and reinsert it with a power
cycle.
8. To exit the screen, press the "X" key until the main
home run screen is shown.
Appendix A - ADM
soft key icon to start the USB to
. Press the
109