Table of Contents
Advertisement
4 INSTALLATION, WIRING AND MAINTENANCE OF THE PRODUCT
(4) Twisting
If SSCNET
condition as when local lateral pressure or bend is added. Consequently,
transmission loss increases, and the breakage of SSCNET
occur at worst.
[2] Precautions for SSCNET
Fix the cable at the closest part to the connector with bundle material in order to
prevent SSCNET
• Wiring duct
If the duct is below the bottom of the module, leave sufficient clearance to
eliminate effects on the SSCNET
(2.76 inch) MIN.
• Bundle fixing
Bundle
materialRecommended:
NK clamp SP type(NIX, INC.)
cable is twisted, it will become the same stress added
cable wiring
cable from putting its own weight on connector.
cable, limit the space height to 70 mm
Unit: [mm] ([inch])
Optical cord
Loose slack
Cable
4 - 8
MELSEC-Q
cable may
Advertisement
Table of Contents
