Mitsubishi Electric MELSEC-QD75MH1 User Manual page 56

2 SYSTEM CONFIGURATION
Part name
SSCNET cable
Applicable connector
Applicable wire size
: = Cable length
(015: 0.15m (0.49ft.), 03: 0.3m (0.98ft.), 05: 0.5m (1.64ft.), 1: 1m (3.28ft.), 3: 3m (9.84ft.), 5: 5m (16.40ft.), 10: 10m
(32.80ft.), 20: 20m (65.62ft.), 30: 30m (98.43ft.), 40: 40m (131.23ft.), 50: 50m (164.04ft.) )
(Note): The cable length of the SSCNET
MR-J3BUS M: The cable length is 3m(0.98ft.) max. / MR-J3BUS M-A: The cable length is 20m(65.62ft.) max. /
MR-J3BUS M-B: The cable length is 50m(164.04ft.) max.
Type
• Connection between QD75MH and MR-J3- B.
• Connection between MR-J3- B and MR-J3- B.
MR-J3BUS M
• Standard code for inside panel.
• 0.15m(0.49ft.), 0.3m(0.98ft.), 0.5m(1.64ft.), 1m(3.28ft.), 3m(9.84ft.)
• Connection between QD75MH and MR-J3- B.
• Connection between MR-J3- B and MR-J3- B.
MR-J3BUS M-A
• Standard code for outside panel.
• 5m(16.40ft.), 10m(32.81ft.), 20m(65.62ft.)
• Connection between QD75MH and MR-J3- B.
• Connection between MR-J3- B and MR-J3- B.
MR-J3BUS M-B
• Long distance cable.
• 30m(98.43ft.), 40m(131.23ft.), 50m(164.04ft.)
A6CON1, A6CON2, A6CON3, A6CON4 (sold separately)
2
0.3 mm (when A6CON1and A6CON4 are used), AWG#24 to 28 (when A6CON2 is used),
AWG#28 (twisted)/AWG#30 (single wire) (when A6CON3 is used)
cable depends on the cable type.
Specifications of recommended manual pulse generator
Item
Model name
Pulse resolution
Output method
Power supply voltage
Current consumption
Life time
Permitted axial loads
Operation temperature
Weight
Number of max. revolution
Pulse signal status
Friction torque
Remarks
25PLS/rev (100 PLS/rev after magnification by 4)
Voltage-output (power supply voltage -1V or more),
Output current Max. 20mA
1000000 revolutions (at 200r/min)
Radial load: Max. 19.6N
Thrust load: Max. 9.8N
-10 to 60°C (14 to 140°F )
0.4 (0.88) [kg(lb)]
Instantaneous Max. 600r/min. normal 200r/min
2 signals: A phase, B: phase, 90° phase difference
0.1N/m (at 20°C (68°F))
2 - 5
MELSEC-Q
Specification
MR-HDP01
4.5 to 13.2VDC
60mA