Internal Clamping; Operation; Clamping A Workpiece - GARANT 363000 User Manual

GARANT XTRIC centring vice
de
en
bg
da
fi
fr
it
hr
Fig. 6: Centring adjustment
lt
1. Using the hexagon L-wrench, release the clamping screw.
2. Using the pin wrench, perform the desired adjustment.
» Refer to the direction of setting shown by the engraving on the centring vice.
nl
3. Using the hexagon L-wrench, tighten the clamping screw.
5.2.

INTERNAL CLAMPING

Hexagon L-wrench size 5
no
pl
pt
ro
1
Tab. 3: Changing over to internal clamping
sv
1. Using the hexagon L-wrench, unscrew the spindle nuts from the spindle.
2. Turn both spindle nuts through 180°.
3. Insert the spindle nuts into the guide and use the hexagon L-wrench to screw them on to the spindle.
sk
6.

Operation

i
Clamp only workpieces with maximum 10 arc minutes out of parallelism in the centring vice without angle compensa-
sl
tion.
Use angle compensation to clamp workpieces that are > 10 arc minutes out of parallelism in the centring vice.
es
6.1.

CLAMPING A WORKPIECE

Torque wrench with 1/2 inch plug-in ratchet, 1/2 inch socket for a size 10 external hexagon
cs
1. By reference to the side scales, roughly pre-position the top jaws.
2. Place the workpiece symmetrically between the top jaws.
hu
3. Use the torque wrench to clamp the workpiece to the desired torque.
22
Z
2
Z
1
3
2
3